1) The wood layers are heated at certain temperatures to reduce the moisture to the appropriate rates according to blades' characteristics.

 

 

2)With the caliber machine we developed , the wood layer thicknesses are equalized with 10 %precision of a millimeter.

 

 

3)The wood layers are cut in the blade form with the cnc machine ,we do not cut the blade after the manufacturing

​

​

4)The middle layers are covered with the required amount of adhesive with the glue application apparatus we developed ; than pressed  with vacuum press system .

​

​

5) After 24 hours of desiccation process the top of the middle layers is covered with carbon  and epoxy ;

than with vacuum press system it is pressed with the top surface wood  layers and finally it is heated in appropriate heat .   .

 

 

6) After 24 hours desiccation process the edges of the blades are insulated to provide the moisture -proof quality .

 

 

7) The writings indicating the properties of the blade are written on the CNC writing machine .

 

 

8) Blade's edges are insulated to ensure moisture - proof feature.

 

9) The blade is covered with varnish. The second layer varnish applied on the blade has a rough structure to better hold the water-based rubber adhesive .

​

 

10) The handle wood layers are combined with the press method , than they are shaped by milling .

​

 

11) The head and handle are combined with two dowels to finish the production .

 

 

12) Finally , with the milling machine a space is opened on the handle and a round wooden badge with A&O logo is mounted.

​